Isaac Scientific Publishing

International Journal of Power and Energy Research

Characterization of Degradation under Standard Environmental Testing Methods for Crystalline Silicon Photovoltaic Modules

Download PDF (1129.7 KB) PP. 150 - 158 Pub. Date: October 12, 2017

DOI: 10.22606/ijper.2017.13002

Author(s)

  • Sagarika Kumar*
    Department of Energy Science & Engineering, Indian Institute of Technology Bombay, Mumbai-400076, India
  • Subinoy Roy
    Department of Energy Science & Engineering, Indian Institute of Technology Bombay, Mumbai-400076, India
  • Rajesh Gupta
    Department of Energy Science & Engineering, Indian Institute of Technology Bombay, Mumbai-400076, India

Abstract

Standard environmental tests have been developed for photovoltaic (PV) modules to assess the reliability of their performance in a short period of time. These tests generate different modes of degradation by combination of environmental stresses. There is a need to differentiate between the standard tests on the basis of severity. This helps to understand the individual and combined degradation effect occurred due to temperature and humidity stress, which is the focus of the present study. In this work, standard tests viz. humidity freeze (HF), thermal cycling (TC) and damp heat test (DH) have been performed on different batches of multi-crystalline silicon PV modules. One batch of modules was subjected to combined tests wherein the three tests were performed in succession and the other batch was separately subjected to the individual tests. Spatial characterization techniques i.e. electroluminescence (EL) and dark lock-in-thermography (DLIT) imaging were used in tandem with illuminated current voltage (I-V) analysis for detection and quantification of degradation under the standard tests. The information obtained from the comparison between the different tests, on a scale of time and severity can be helpful for preliminary investigations performed on effects of the common environmental degradation factors like high temperature, high humidity and thermal ramping. The presented findings can further aid research and development on different aspects of reliability testing on PV module performance under environmental effects.

Keywords

Photovoltaic, multicrystalline silicon modules, reliability, degradation, defects, characterization

References

[1] IEC 61215, crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval, 2005.

[2] L.N. Dumas and A. Shumka, “Photovoltaic module reliability improvement through application testing and failure analysis”, IEEE Transactions on Reliability, vol. R-31, pp. 228–234, 1982.

[3] C. Ferrara and D. Philipp, “Why do PV modules fail?”, in International conference on materials for advanced technologies, 2011. Proceedings. Energy Procedia, 2011.

[4] A. Ndiaye, A. Charki, A. Kobi, C. M. F. Kébé, P. Ndiaye, and V. Sambou, “Degradations of silicon photovoltaic modules: A literature review,” Solar Energy, vol. 96, pp. 140–151, 2013.

[5] S. Kajari-Schr?der, I. Kunze, and M. K?ntges, “Criticality of cracks in PV modules”, in silicon PV conference, 2012. Proceedings. Energy Procedia, vol. 27, pp. 658–663, 2012.

[6] C. Oh, A. Kim, J. Kim, J. Bang, J. Ha, and W.S. Hong, “Bonding copper ribbons on crystalline photovoltaic modules using various lead-free solders,” Journal of Materials Science: Materials in Electronics, vol. 26, no. 12, pp. 9721–9726, 2015.

[7] P. Chaturvedi, B. Hoex and T.M. Walsh, “Broken metal fingers in silicon wafer solar cells and PV modules”, Solar Energy Materials and Solar Cells, vol. 108, pp. 78–81, 2013.

[8] M. T. Zarmai, N. N. Ekere, C. F. Oduoza, and E. H. Amalu, “ Optimization of thermo-mechanical reliability of solder joints in crystalline silicon solar cell assembly,” International Journal of Mechanical Engineering, vol. 59, pp. 117–125, 2016.

[9] N. S. Bosco, T. J. Silverman, and S. R. Kurtz, “On the effect of ramp rate in damage accumulation of the CPV die-attach,” in IEEE Photovoltaic Specialists Conference, 2012.

[10] M. A. Munoz, M. C. Alonso-García, N. Vela, and F. Chenlo, “Early degradation of silicon PV modules and guaranty conditions,” Solar Energy, vol. 85, no. 9, pp. 2264–2274, 2011.

[11] W. Oh, S. Kim, S. Bae, N. Park, Y. Kang, H.S. Lee, and D. Kim, “The degradation of multi-crystalline silicon solar cells after damp heat tests,” Microelectronics Reliability, vol. 54, pp. 2176–2179, 2014.

[12] N. Park, C. Han, and D. Kim, “Effect of moisture condensation on long-term reliability of crystalline silicon photovoltaic modules,” Microelectronics Reliability, vol. 53, no. 12, pp. 1922–1926, 2013.

[13] K. R. McIntosh and X. Dai, “Damp-heat degradation and repair of oxide-passivated silicon,” Physica Status Solidi (A) Applications and Material Sciences, vol. 208, no. 8, pp. 1931–1936, 2011.

[14] C. Peike, S. Hoffmann, P. Hülsmann, B. Thaidigsmann, K. A. Wei?, M. Koehl, and P. Bentz, “Origin of damp-heat induced cell degradation,” Solar Energy Materials and Solar Cells, vol. 116, pp. 49–54, 2013.

[15] R. Khatri, S. Agarwal, I. Saha, S. K. Singh, and B. Kumar, “Study on long term reliability of photo-voltaic modules and analysis of power degradation using accelerated aging tests and electroluminescence technique”, in Silicon PV, 2012. Proceedings. Energy Procedia, vol. 8, pp. 396–401, 2011.

[16] T. Fuyuki and A. Kitiyanan, “Photographic diagnosis of crystalline silicon solar cells utilizing electroluminescence,” Applied Physics A: Materials Science and Processing, vol. 96, no. 1, pp. 189–196, 2009.

[17] P. Somasundaran, A. Sinha and R. Gupta, “Simulation and characterization of spatial variation of shunts in industrial solar cells by PSPICE and Dark Lock-in Thermography”, in 27th European Photovoltaic Solar Energy Conference and Exhibition, 2012.

[18] P. Somasundaran and R. Gupta, “Evaluation of shunt losses in industrial silicon solar cells,” International Journal of Photoenergy, vol. 2016, 2016.

[19] R. Gupta, P. Somasundaran, and D. K. Nandi, “Electrical simulation and characterization of shunts in solar cells,” Applied Mechanics and Materials, vol. 110–116, no. 1, pp. 2453–2457, 2011.

[20] A. Sinha, O. S. Sastry, and R. Gupta, “Nondestructive characterization of encapsulant discoloration effects in crystalline-silicon PV modules,” Solar Energy Materials and Solar Cells, vol. 155, pp. 234–242, 2016.

[21] A. Sinha, O. S. Sastry, and R. Gupta, “Detection and characterisation of delamination in PV modules by active infrared thermography,” Nondestructive Testing and Evaluation, vol. 31, no. 1, pp. 1–16, 2016.

[22] T. Fuyuki, H. Kondo, Y. Kaji, A. Ogane, and Y. Takahashi, “Analytic findings in the electroluminescence characterization of crystalline silicon solar cells,” Journal of Applied Physics, vol. 101, no. 2, 2007.